Hello, we will now show you the TWIN BUSCH truck tyre changer TW X-00 T. The TW X-00 T has a self centering 4 clamping arm system
made of special steel and with a large clamping range. The machine has two powerful electric motors for forward
and reverse, as well as the hydraulic aggregate. The TW X-00 T has a flexible mounting arm with plate and claw. The mounting arm can be rotated and folded out on the slide, and can be hydraulically raised, lowered and moved. Controlling the machine is extremely simple with the joystick and pedals. The clamping jaws are moved into the center hole of the rim. Press the tyre bead inwards with the mounting plate. Rotate the wheel until the first bead is completely loosened. Now repeat the pressing on the inner side. Rotate the mounting arm for the plate to face the wheel. The mounting claw can now be pushed between the rim and the bead. Carefully pull the bead over the flange with the mounting claw. The pry bar will be used now. Place the pry bar to the right of the claw. Rotate the wheel counterclockwise until the bead is completely out of the rim. Move the mounting arm to the inner side of the wheel. Push the second bead carefully out of the rim with the mounting plate. Use mounting paste for an easy and safe assembly. Grease both beads with the mounting paste as well. Push the first tyre bead onto the rim with a slight rotation. Fix the bead pressing tool on the rim. Position the mounting plate so that the bead is lead into the rim well. Rotate the wheel counterclockwise until the bead is completely mounted. Alloy clamping jaws are optionally available
for the TW X-00 T to gently mount alloy rims.

TW X-00 T: Truck wheel balancer from TWIN BUSCH ®
Tagged on:                                                                                                                                                                         

Leave a Reply

Your email address will not be published. Required fields are marked *